| Frequency Range |
x1 range 20 kHz to 1.5 kHz (23
steps), x100 range 2 kHz to 150 kHz (23 steps) |
| Accuracy |
20 Hz through 100 kHz (+-3% or less), 120 kHz and 150 kHz
(+-5% or less) |
| Output
Control |
0 dB/-20 dB attenuator switch and variable amplitude control |
| Output
impedance |
approx. 600Ω |
| SINEWAVE
CHARACTERISTICS |
| Output
Voltage |
> 1.2V rms at max. setting (no load) |
| Output
Flatness |
(Short term) 20 Hz to 150 kHz +-0.5dB (reference frequency 1
kHz) |
| Distortion |
200 Hz - 15 kHz 0.5% (THD) or less, 50 Hz-28 kHz 0.1% (THD) or
less, 20 Hz-100kHz 0.3% (THD) or less |
| SQUARE WAVE
CHARACTERISTICS |
| Output
Voltage |
> 5V p-p at maximum setting |
| Rise and
Fall Time |
Less than 0.5 microseconds |
| Sag |
Less than 5% at 20 Hz (DC coupled) |
| Over Shoot |
<2% from maximum output, to 50mV p-p |
| Duty Ratio |
50% + 5% |
| SYNC OUTPUT
CHARACTERISTICS |
| Output
Voltage |
> 1.2 V rms (no load) |
| Output
Impedance |
1 kΩ + 5% |
| Other
specifications same as sinewave characteristics |
| GENERAL
INFORMATION |
| Operating
Temperature |
0 0 C to +50 0 C; specifications apply from 10 0 C to 30 0 C,
<80% R.H. |
| Storage
Temperature |
-20 0 C to +60 0 C, without battery |
| Power
Requirements |
9V battery NEDA 1604A |
| Battery Life |
35 hours typical with Alkaline |
| Battery
Indicator |
LED indicates low battery |
| Dimensions
(HxWxD) |
6x3.3x0.9'' (150 x82x21mm) |
| Weight |
7 oz. (200g) including battery |
