Home > SHOP ALL PRODUCTS > Brands > Compliance West >

Compliance West HT-3000PR, AC/DC Output, Hipot/Ground Continuity Tester, 0-2000 VAC / 0-2800 VDC

Compliance West HT-3000PR, AC/DC Output, Hipot/Ground Continuity Tester, 0-2000 VAC / 0-2800 VDC
Compliance West HT-3000PR, AC/DC Output, Hipot/Ground Continuity Tester, 0-2000 VAC / 0-2800 VDC
 
Our Price: $1,835.00


Availability: Usually Ships in 2 to 3 Weeks
Product Code: HT-3000PR

Description Application Notes Extended Information
 
Features
The New product of our Hipot Line Tester, the HT-PR serie Hipot Tester now with adjustable ground continuity test in range of 0.08 - 1.50 Ω, Auto-offset for test leads up to 1.00 Ω, Performs 0-2000 AC or 0-2800 DC Hipot Test. Neutral/Hot to Ground Leakage current test up to 20 mA AC or 5 mA DC. Easy to use and connect, Ships complete with cables, a manual, and a Calibration Certificate. Made in the USA. Calibration and repair services available

Product Package

  • HT-3000PR Hipot Tester
  • HT-PR Product Manual
  • A 18 AWG Test Lead (Alligator Clip/Banana Plug ends, black)
  • Ground Continuity Connector Tip
  • A red 18 AWG High Voltage Test Lead (Alligator Clip/High Voltage jack)
  • A 18 AWG Line Power Cord to provide power to the HT-PR
  • NIST Traceable Calibration Certificate to MIL-STD45662-A

    • High precision leakage current, duration and ground continuity settings.
    • Allows no load setup of leakage current and test dwell times.
    • Once entered, ground continuity setting, leakage current and test dwell times can be referenced on the front panel display when unit is not testing.
    • Leakage currents can be set from 1-20 mA AC or 1-5 mA DC in 0.1mA increments.
    • Dwell times can be set from 1-60 seconds in 1 second increments.
    • Two tests with one setup. Conducts UL/CSA Ground continuity and Hipot tests with one setup, so no additional equipment is needed.
    • Small and light. 9.25" wide x 4.75" high x 10" deep. 14 lbs. But rugged enough to test manufactured housing.
    • Ground continuity check is defeatable for testing two-wire products.
    • Easy equipment connections. Plug your equipment right into the NEMA plug on the front panel. No adapters needed!
    • J2 and J3 cords allow connection of pigtail power leads.
    • Simple test outcome judgement. Green lights mean pass - red lights mean fail. Failing tests sound a buzzer as well.
    • Ready for your UL Inspector out of the box. NIST Traceable Calibration Certificate to MIL-STD45662-A is included. Cal cert is in accordance with UL guidance.
    • Operation Instructions are printed on the rear panel for easy reference.
    • In-depth testing. Both true Arc Dectection and Leakage Current circuits test the product to find problems.
      RED lights and a buzzer leave no question if a failure has occurred.
    • Expandable for TUV/European Agency Testing. Can be connected to our GF-30ac 25A Ground Bond Tester with optional TEST-LINK™.
    • Easy shift-by-shift Function Test. Compatible with our Patented function checker, the HTT-1and HTT-1R (With 0.1 ohm Ground check Pass/Fail Setup).


    Share your knowledge of this product with other customers... Be the first to write a review

    Browse for more products in the same category as this item:

    SHOP ALL PRODUCTS > Brands > Compliance West
    SHOP ALL PRODUCTS > Brands
    SHOP ALL PRODUCTS > Testers > Hipot Testers
    SHOP ALL PRODUCTS > Testers
    SHOP ALL PRODUCTS