 |
 |
 |
|
Model | DCS-7515A | DCS-7510A | DCS-7507A | DCS-4605 | Vertical axis | Sensibility | 2mV/div to 10V/div (1-2-5 steps) | Accuracy | ±(3% ×[Readout] + 0.1div + 1mV) | Bandwidth(-3dB) | DC(AC)Coupling | DC(10Hz) to 150MHz | DC(10Hz) to 100MHz | DC(10Hz) to 70MHz | DC(10Hz) to 50MHz | Rise time | 2.3ns max | 3.5ns max | 5ns max | 7.0ns max | Input impedance | 1MΩ±2%, Approx.15pF | Maximum input voltage | 300V (DC + AC peak), Installation Category Ⅱ | 20MHｚ bandwidth (-3dB) function | Available | Trigger | Sources | CH1,CH2, LINE, EXT | Modes | AUTO, NORMAL, SINGLE, TV(Video), Edge, Pulse Width, Forcing | Coupling | AC, DC, Low/High Frequency rejection, Noise rejection | Trigger sensibility | 0.5div (5mV min.) | DC to 25MHz | Ext. Trigger sensibility | 1.5div (5mV min.) | 25MHz to 150MHz | 25MHz to 100MHz | 25MHz to 70MHz | 25MHz to 50MHz | Horizontal axis | Range | 1ns/div to 50s/div, 1-2-5steps (50ms/div to 50s/div at Roll mode) | Modes | Main, Area magnification, Magnification, Roll, X-Y | Accuracy | ±0.01% | Delay range | Pre-trigger | 8div max. | 10 div max. | Post-trigger | 100div | 1000div | Signal Acquisition System | Sample rate | Real-time | 1GS/s max. (1ch) | 250MS/s max. (1ch) | Equivalent | 25GSs/s max. | Vertical resolution | 8bits, 25levels/div | Record length | One mega points max. (2ch), Two mega points max. (1ch) | 4000 points | Acquisition modes | Normal, Peak Detect, Average | Peak detection | 10ns (500ns/div to 50s/div) | Average | 2, 4, 8, 16, 32, 64, 128, 256 | Cursors and Measurement | Automatic measurement functions | Vertical axis | Peak-to-peak, Max, Min, Amp, High, Low, Average, Rms
Upper/Lower overshoot, Upper/Lower preshoot | Horizontal axis | Frequency, Period, Rise time, Fall time,
Positive pulse width, Negative pulse width, Duty cycle | Delaying | FRR, FRF, FFR, FFF, LRR, LFR, LFR, LFF | － | Cursors measurement | Voltage / Time difference between cursors(V, ⊿T, 1/⊿T) | Frequency counter | Resolution : six digits, Accuracy : ±2%(cannot measure below two Hz) | Interfaces | USB device port | Standard equipment, Compliant with USB 1.1 and 2.0 full-speed,
Compatible with PictBridge printers | － | SD card slot | Standard equipment, Compliant with SD/SDHC (Class 2, 4 and 6),
Capacity 32GB Max.(SDHC) | General | Power requirements | 100V to 240V AC, 47Hz to 63Hz | Power consumption | 18Watts, 40VA max | Dimensions | 341.5(W)×162.3(H)×159(D)mm | Weight | Approx. 2.5kg | Accessories | Probe, AC power cable,
CD-ROM(instruction manual, APP software: FreeWave) |
|
|
|
|
 |
|
 |
|
|
|
 |
|
 |
|
Features
● High sample rate (except DCS-4605)Maximum 1GS/s (25ns/div-100μs/div) (using 1ch)
Maximum 500MS/s (50ns/div-100μs/div) (using 2ch at a time)
25GS/s equivalent sample rate per channel● Long memory (except DCS-4605)Maximum two mega points (one mega points at using 2ch) long memory is available and it enables to monitor magnified wave forms in detail.● Automatic measurement functions27 kinds ( DCS-4605: 19 kinds) of automatic measurement functions ( for vertical axis : 12 items, for horizontal axis : seven items and for delaying : eight items (DCS-7500A Series only)) are available and five parameters can be displayed on the LCD display at same time.● Automatic calculation functionsVersatile calculation ( +, -, x, FFT, FFT-RMS analysis* ) functions are available. (*: DCS-7500A Series only)● Built-in memoryThe DCS-7500A series and DCS-4605 can memories front panel setting and wave forms data by themselves using the memory.● Clear displayThe DCS-7500 series and DCS-4605 have a broad outlook 5.6 inch color LCD display (TFT) and LED back light.● Support voltage and current probesEnable to set measuring scales of voltage / current (vertical axis) at from x0.1 to x2000 (1-2-5 steps) according to probes.● Various trigger functionsEdge trigger, Video trigger and Pulse trigger functions are available.● An "educational mode" function can be used in order to prevent a student from using an automatic calculation function.● Application software; FreeWaveThe software enables to control the DCS-7500 series and DCS-4605 by PC (through USB). It can display wave forms on PC display in real time and save wave forms data as not only still picture but also motion picture by PC.● Go-NoGo function● Data logger function (with using USB memory)
|
|
|
|
|
|
|
