Home > SHOP ALL PRODUCTS > Discountinued Products >

Rigol DS1062CA 60 MHz Digital Oscilloscope with 2 channels plus USB storage and connectivity and 2 GSa/sec sampling

Rigol DS1062CA 60 MHz Digital Signal Oscilloscope, 2 channels. New in box.
Rigol DS1062CA 60 MHz Digital Signal Oscilloscope, 2 channels. New in box.
 
Discontinued Product


Availability: Not available
Product Code: DS1062CA

Features
 
Features
  1. The 2 GSa/s maximum real-time sample rate,the 50 GSa/s maximum equivalent time sample rate and up to 300 MHz of bandwidth ensures you capture and observe your entire signal
  2. Up to 2000 wfms/s refresh rate
  3. Ultra Compact Design with small footprint save your bench space
  4. 5.7¡¯ 64K TFT color LCD, bright and vivid waveform display
  5. Memory depth: 10 kpts (Single Channel), 5 kpts (Dual Channels)
  6. Versatile trigger modes: Edge, Video, Pulse Width, Slope, Alternate
  7. Adjustable trigger sensitivity: Effectively filter noise fromtrigger signal and avoid false trigger
  8. Cursor measurements: Manual, Track and Auto Measuremodes
  9. 10 waveforms, 10 setups, BMP and CSV storage
  10. Math functions: Add, Subtract, Multiply, FFT, Invert
  11. Special digital filter and waveform recorder
  12. Built-in hardware frequency counters
  13. Dual channels plus external trigger. Bandwidth including60 MHz, 100 MHz, 200 MHz, 300 MHz
  14. Standard interface: USB Device, RS-232£»USB Host, to support USB disk and USB printer
  15. Standard configuration: Pass/Fail test,the signal out ofthe pass fail function is isolated to prevent unwantedinterference
  16. Multi-language user interface, built-in help system

Model DS1062CA DS1102CA DS1202CA DS1302CA
Bandwidth 60MHz 100MHz 200MHz 300MHz
Real-time Sample Rate 2 GSa/s(Single Channel), 1 GSa/s(Dual Channels)
Equivalent Sample Rate 50 GSa/s
refresh rate 2000 wfms/s
Memory Depth 10 kpts (Single Channel), 5 kpts (Dual Channel)

 
 
 
 
 
 
 
Model DS1062CA DS1102CA DS1202CA DS1302CA
Bandwidth 60 MHz 100 MHz 200 MHz 300 MHz
Memory Depth 10 kpts (Single Channel), 5 kpts (Dual Channel)
Channels Dual Channels + External Trigger
Real-time Sample Rate 2 GSa/s(Single Channel), 1 GSa/s (DUal Channel)
Equivalent Sample Rate 50 GSa/s
Rise Time 5.8 ns 3.5 ns 1.7 ns 1.1 ns
Time Base Range 5 ns/div to 50 s/div 2 ns/div to 50 s/div 1 ns/div to 50 s/div
Input Impedance 1 M¦¸ || 15 pF 1 M¦¸ || 15 pF£¬50 ¦¸
Time Base Precision ¡À50ppm
X-Y Operation Bandwidth 60 MHz 100 MHz 200 MHz 300 MHz
Phase Difference ¡À 3¡ã
Trigger Modes Edge, Video, Pulse Width, Slope, Alternative
Trigger Sources CH1£¬CH2£¬Ext£¬Ext/5£¬AC Line
Common Parameters
Vertical Sensitivity 2 mV/div to 10 V/div
Vertical Resolution 8 bits
Input Coupling DC, AC, Ground
Maximum Input Voltage 300 V (DC + AC peak)
Roll Range 500 ms/div to 50 s/div
Automatic Measurements Vpp, Vamp, Vmax, Vmin, Vtop, Vbase, Vavg, Vrms, Preshoot, Overshoot, Frequency, Period, Rise Time, Fall time, Positive Width, Negative Width, Positive Duty Cycle, Negative Duty Cycle, Delay1¡ú2*, Delay 1¡ú2*
Cursor Measurements Manual, Track and Auto Measure modes
Math Add, Subtract, Multiply, FFT, Invert
Storage Internal£º10 Waveforms and Setups
USB£ºBMP, CSV, Waveforms and Setups
I/O USB Device£¬USB Host£¬RS-232£¬P/F Out (Isolated)
Display TFT (64K, Color LCD), 320 x 234
Power Worldwide Use, 100 ¨C 240 V / 50 VA Max
Weight 2.3 kg

 

Share your knowledge of this product with other customers... Be the first to write a review

Browse for more products in the same category as this item:

SHOP ALL PRODUCTS > Discountinued Products
SHOP ALL PRODUCTS


Rigol DS2102A-S 100 MHz, 2 Channel Oscilloscope with 2 GSa/sec and 14 million memory points standard as well as low noise front end (500 uV/div) and 65,000 frames of waveform recording all with a vibrant 8 inch display. 50 Ohm input included. 2 Channel in Discontinued Product