Home > SHOP ALL PRODUCTS > Brands > Tektronix >

Tektronix TDS3032C Oscilloscope; Dpo, 300Mhz, 2.5 Gs/S, 2 Channel, Color Display, Certificate Of Traceable Calibration Standard

Tektronix TDS3032C Oscilloscope 300 MHz, 2 CH, 2.5 GS/s, VGA Video Port. Demo Unit, Used.
Tektronix TDS3032C Oscilloscope 300 MHz, 2 CH, 2.5 GS/s, VGA Video Port. Demo Unit, Used.
  
Our Price: $13,442.00 USD


Availability: 4 to 6 weeks
Product Code: TDS3032C
 

Description
 
Features

TDS3000C Series Oscilloscopes

 

Performance you need at a price you can afford

TDS3000C Series Oscilloscopes

With bandwidths up to 500 MHz, the Tektronix TDS3000C Series oscilloscopes provide you with affordable performance in a compact, battery-capable design.

This popular Series, now equipped with USB host port and PC connectivity software, also provides you with familiar operation and simple navigation so you spend less time learning and re-learning how to use your oscilloscope and more time on the task at hand.
 
Digital Phosphor Oscilloscopes
TDS3000C Series
Features & Benefits
Key Performance Specifications
    • 100 MHz, 300 MHz, and 500 MHz Bandwidth Models
    • 2 or 4 Channels
    • Sample Rates up to 5 GS/s Real-time on All Channels
    • 10 k Standard Record Length on All Channels
    • 3,600 wfms/s Continuous Waveform Capture Rate
    • Suite of Advanced Triggers
Ease of Use Features
    • Front Panel USB Host Port for Easy Storage and Transfer of Measurement Data
    • 25 Automatic Measurements
    • FFT Standard
    • Multiple Language User Interface
    • WaveAlert® Automatic Waveform Anomaly Detection
    • TekProbe® Interface Supports Active, Differential and Current Probes for Automatic Scaling and Units
Portable Design
    • Lightweight Design (only 7 lbs / 3.2 kg) for Easy Transport
    • Optional Internal Battery Operation Provides Up to Three Hours Without Line Power
Application Modules for Specialized Analysis
    • Advanced Analysis Module
    • Limit Testing Module
    • Telecommunications Mask Testing Module
    • Extended Video Module
    • 601 Serial Digital Video Module
Applications
    • Digital Design and Debug
    • Video Installation and Service
    • Power Supply Design
    • Education and Training
    • Telecommunications Mask Testing
    • Manufacturing Test
    • General Bench Testing
Performance You Need at a Price You Can Afford
Performance in an Affordable Package
The TDS3000C Series digital phosphor oscilloscopes (DPO) provide you with the performance you need at a price you can afford. Bandwidths range from 100 MHz to 500 MHz, with up to 5 GS/s sample rates for accurate representation of your signal.
DPOs Provide a Greater Level of Insight into Complex Signals
To solve a problem, first you need to see it. The TDS3000C Series combines 3,600 wfms/s continuous waveform capture rate and real-time intensity grading so you can see the problem and solve it.
Fast waveform capture rates on a continuous basis save time by quickly revealing the nature of faults so advanced triggers can be applied to isolate them.
Real-time intensity grading highlights the details about the history of a signal’s activity, making it easier to understand the characteristics of the waveforms you’ve captured. Unlike other comparable oscilloscopes, the history remains even after the acquisition is stopped.
Quickly Debug and Characterize Signals with DRT Sampling Technology and sin(x)/x Interpolation
The TDS3000C Series combines unique digital real-time (DRT) sampling technology with sin(x)/x interpolation to allow you to accurately characterize a wide range of signal types on all channels simultaneously. With the TDS3000C Series there is no change in sampling rate when additional channels are turned on, unlike other comparable oscilloscopes. This sampling technology makes it possible to capture high-frequency information, such as glitches and edge anomalies, that elude other oscilloscopes in its class, while sin(x)/x interpolation ensures precise reconstruction of each waveform.

Look for unintentional circuit noise with the TDS3000C Series’ FFT capability.


Custom video triggering allows the TDS3000C Series to trigger on standards such as RS-343 (26.2 kHz scan rate).


The TDS3000C Series provides breakthrough test speeds for telecommunications line card testing. The telecom QUICKMENU puts all the commonly used telecom test functions on a single menu.


The TDS3000C Series with the TDS3LIM module is ideal for manufacturing test applications where fast Go/No-Go decisions are required.


Trace and identify ITU-R BT.601 video signals with the TDS3SDI 601 Serial Digital Video Module.


WaveAlert waveform anomaly detection alerts you to any waveform that deviates from the “normal” input such as the glitch on channel 2.

 
Easy Set-Up and Use
When working under tight deadlines, you need your oscilloscope to be intuitive; you want to minimize time spent learning and re-learning how to use it. The TDS3000C Series oscilloscopes help reduce your learning curve. Simple navigation and dedicated front panel controls get you to where you want to be quickly, so that you spend less time learning and more time on the task at hand.
Simple Documentation and Analysis
The TDS3000C Series comes equipped with a USB host port so you can easily store and transfer measurement information to your PC.
OpenChoice® PC Communication Software allows you to simply pull screen images and waveform data into a stand-alone desktop application or directly into Microsoft Word and Excel.
To complement OpenChoice, National Instruments LabVIEW SignalExpress™ Tektronix Edition Software provides you with extended capabilities including advanced analysis, data logging, remote instrument control and live waveform analysis.
If you prefer not to use a PC for analysis, the TDS3000C Series comes standard with 25 automatic measurements, waveform add, subtract, divide, and multiply math functions, and Fast Fourier Transform (FFT). Unlike other comparable oscilloscopes, the TDS3000C Series math and measurement allows you to use the full acquisition record length or isolate a specific occurrence within an acquisition.

Easily transfer, document and analyze data on your PC.

 
Instrument Control
Utilizing the built-in Ethernet port, e*Scope web-based remote control allows you to a control TDS3000C Series oscilloscope from anywhere, using the Internet and your PC.
Work Where you Need to
The TDS3000C Series packs the power of a DPO in a compact design that is only 5.9 in. (149 mm) deep, freeing up valuable bench-top space. And when you need to move your oscilloscope to another lab, its portable 7 lbs (3.2 kg) design makes for easy transport.
If your work demands even more mobility, then the optional battery pack will give you up to three hours of operation without line power.

TDS3BATC provides you with up to three hours of portable battery operation.

Characteristics

TDS3000C Series Electrical Characteristics

TDS3012C

TDS3014C

TDS3032C

TDS3034C

TDS3052C

TDS3054C

Bandwidth

100 MHz

100 MHz

300 MHz

300 MHz

500 MHz

500 MHz

Calculated Rise Time (typical)

3.5 ns

3.5 ns

1.2 ns

1.2 ns

0.7 ns

0.7 ns

Input Channels

2

4

2

4

2

4

External Trigger Input

Included on all models

Sample Rate on each channel

1.25 GS/s

1.25 GS/s

2.5 GS/s

2.5 GS/s

5 GS/s

5 GS/s

Record Length

10 k points

Vertical Resolution

9 bits

Vertical Sensitivity, 1 MΩ

1 mV/div to 10 V/div

Vertical Sensitivity, 50 Ω

1 mV/div to 1 V/div

Input Coupling

AC, DC, GND

Input Impedance

1 MΩ in parallel with 13 pF or 50 Ω

DC Gain Accuracy

+2%

Maximum Input Voltage, 1 MΩ

150 VRMS with peaks at < 400 V

Maximum Input Voltage, 50 Ω

5 VRMS with peaks at < 30 V

Position Range

+ 5 div

Bandwidth Limit

20 MHz

20 MHz

20 MHz, 150 MHz

20 MHz, 150 MHz

20 MHz, 150 MHz

20 MHz, 150 MHz

Time Base Range

4 ns to 10 s

4 ns to 10 s

2 ns to 10 s

2 ns to 10 s

1 ns to 10 s

1 ns to 10 s

Time Base Accuracy

+20 ppm over any 1 ms time interval

Input/Output Interfaces

Ethernet Port

RJ-45 connector, supports 10Base-T LAN

USB Port

Front-panel USB 2.0 host port

Supports USB flash drive

GPIB Port

Full talk/listen modes, setting and measurements

(Optional with TDS3GV Communications Module)

RS-232-C Port

DB-9 male connector, full talk/listen modes; control of all modes, settings and measurements

Baud rates up to 38,400

(Optional with TDS3GV Communications Module)

VGA Video Port

DB-15 female connector, monitor output for direct display on large VGA-equipped monitors

(Optional with TDS3GV Communications Module)

External Trigger Input

BNC connector, input impedence > 1 MΩ in parallel with 17 pF; max input voltage is 150 VRMS

Acquisition Modes

DPO

Captures and displays complex waveforms, random events and subtle patterns in actual signal behavior. DPOs provide 3 dimensions of signal information in real time: Amplitude, time and the distribution of amplitude over time.

Peak Detect

High frequency and random glitch capture. Captures glitches as narrow as 1 ns (typical) using acquisition hardware at all time base settings.

WaveAlert®

Monitors the incoming signals on all channels and alerts the user to any waveform that deviates from the normal waveform being acquired.

Sample

Sample data only

Average

Waveform averaged, selectable from 2 to 512

Envelope

Min-max values acquired over one or more acquisitions

Single Sequence

Use the Single Sequence button to capture a single triggered acquisition sequence at a time

Trigger System

Main Trigger Modes

Auto (supports Roll Mode for 40 ms/div and slower), Normal, Single Sequence

B Trigger

Trigger after time or events

Trigger After Time Range

13.2 ns to 50 s

Trigger After Events Range

1 to 9,999,999 events

Trigger Types

   

Edge

Conventional level-driven trigger. Positive or negative slope on any channel. Coupling selections: AC, DC, Noise Reject, HF Reject, LF Reject.

Video

Trigger on all lines or individual lines, odd/even or all fields on NTSC, PAL, SECAM

Extended Video

Trigger on specific lines in broadcast and non-broadcast (custom) standards and on analog HDTV formats (1080i, 1080p, 720p, 480p). Requires TDS3VID or TDS3SDI application module.

Pulse Width

(or Glitch)

Trigger on a pulse width <, >, =, ≠ to a selectable time limit ranging from 39.6 ns to 50 s

Runt

Trigger on a pulse that crosses one threshold but fails to cross a second threshold before crossing the first again

Slew Rate

Trigger on pulse edge rates that are either faster or slower than a set rate. Edges can be rising, falling or either.

Pattern

Specifies AND, OR, NAND, NOR when true or false for a specific time

State

Any logic state. Triggerable on rising or falling edge of a clock. Logic triggers can be used on combinations of 2 inputs (not 4).

Comm

Provides isolated pulse triggering required to perform DS1/DS3 telecommunications mask testing per ANSI T1.102 standard. Requires TDS3TMT application module.

Alternate

Sequentially uses each active channel as a trigger source

Waveform Measurements

Cursors

Amplitude, Time

Automatic Measurements

Display any four measurements from any combination of waveforms. Or display all measurements with measurement snapshot feature. Measurements include Period, Frequency, +Width, -Width, Rise time, Fall time, +Duty cycle, -Duty cycle, +Overshoot, High, Low, Max, Min, Peak-to-peak, Amplitude, Mean, Cycle mean, RMS, Cycle RMS, Burst width, Delay, Phase, Area*1, Cycle Area*1

Measurement Statistics

Mean, Min, Max, Standard deviation. Requires TDS3AAM application module.

Thresholds

User-definable thresholds for automatic measurements; settable in percent or voltage

Gating

Isolate a specific occurrence within an acquisition to take measurements, using either the screen or cursors

Waveform Math

Arithmetic

Add, subtract, multiply, and divide waveforms

FFT

Spectral magnitude. Set FFT vertical scale to Linear RMS or dBV RMS, and FFT window to Rectangular, Hamming, Hanning, or Blackman-Harris.

Advanced Math*1

Integrate, Differentiate, Define extensive algebraic expressions including analog waveforms, math functions, scalars, up to two user-adjustable variables and results of parametric measurements. For example: (Intg (Ch1-Mean(Ch1)) x 1.414 x VAR1).

Note: Requires TDS3AAM application module.

Waveform Processing

Autoset

Single-button, automatic setup of all channels for vertical, horizontal and trigger systems, with undo autoset

Deskew

Channel-to-channel deskew +10 ns may be manually entered for better timing measurements and more accurate math waveforms

Display Characteristics

Display Type

6.5 in. (165.1 mm) liquid crystal TFT color display

Display Resolution

640 horizontal x 480 vertical pixels (VGA)

Interpolation

Sin(x)/x

Waveform styles

Dots, vectors, variable persistence, infinite persistence

Graticules

Full, grid, cross-hair and frame. NTSC, PAL, SECAM, and vectorscope (100% and 75% color bars) with optional TDS3VID or TDS3SDI application modules

Format

YT, XY, and Gated XYZ (XY with Z-axis blanking available on 4-channel instruments only)

Power Source

AC line power

   

   Source voltage

100 VRMS to 240 VRMS +10%

   Source frequency

45 Hz to 440 Hz from 100 V to 120 V

45 Hz to 66 Hz from 120 V to 240 V

   Power consumption

75 W maximum

Battery power

Requires TDS3BATC, rechargeable lithium ion battery pack

   Operating time, typical

3 hours

Environmental and Safety

   

Operating

Non-operating

Temperature

0 ºC to +50 ºC

-40 ºC to +71 ºC

Humidity

Operating and Non-operating: up to 95% RH at or below +30 ºC

Operating and Non-operating: up to 45% RH +30 ºC up to +50 ºC

Altitude

To 3,000 m

15,000 m

Electromagnetic Compatibility

Meets or exceeds EN61326 Class A, Annex D radiated and conducted emissions and immunity; EN6100-3-2 AC Powerline Harmonic Emissions; EN6100-3-3 Voltage Changes, Fluctuation, and Flicker; FCC 47 CFR, Part 15, Subpart B, Class A; Australian EMC framework.

Safety

UL61010B-1, CSA1010.1, IEC61010-1, EN61010-1

Physical Characteristics

Instrument

Dimensions

mm

in.

   Width

375.0

14.8

   Height

176.0

6.9

   Depth

149.0

5.9

Weight

kg

lbs.

   Instrument only

3.2

7.0

   with accessories

4.5

9.8

Instrument Shipping

Package Dimensions

mm

in.

   Width

502.0

19.8

   Height

375.0

14.8

   Depth

369.0

14.5

Rackmount (RM3000)

Dimension

mm

in.

   Width

484.0

19.0

   Height

178.0

7.0

   Depth

152.0

6.0

*1 Requires TDS3AAM application module.

Share your knowledge of this product with other customers... Be the first to write a review

Browse for more products in the same category as this item:

SHOP ALL PRODUCTS > Brands > Tektronix
SHOP ALL PRODUCTS > Oscilloscopes
SHOP ALL PRODUCTS > Oscilloscopes > Digital Oscilloscopes > Bench top
SHOP ALL PRODUCTS > Oscilloscopes > Digital Oscilloscopes
SHOP ALL PRODUCTS > Brands
SHOP ALL PRODUCTS