luke FLUKE-1730-BASIC Portable Energy Logger Basic. New in Box.

Home > SHOP ALL PRODUCTS > Brands > Fluke >

Fluke FLUKE-1730-BASIC Portable Energy Logger Basic. (Discontinued)

luke FLUKE-1730-BASIC Portable Energy Logger Basic. New in Box.

Fluke FLUKE-1743 Power Quality Logger - Memobox. New in Box.

Discontinued

Product Code: FLUKE-1730-BASIC

Description

Application Notes

Replacement: Fluke-1732/B

Specifications
Accuracy
Parameter		Range	Resolution	Intrinsic Accuracy at Reference Conditions (% of Reading + % of Full Scale)
Voltage		1000 V	0.1 V	± (0.2 % + 0.01 %)
Current: Direct input	iFlex1500-12	150 A	0.1 A	± (1 % + 0.02 %)
		1500 A	1 A
	iFlex3000-24	300 A	1 A	± (1 % + 0.02 %)
		3000 A	10 A
	iFlex6000-36	600 A	1 A	± (1.5 % + 0.03 %)
		6000 A	10 A
	i40s-EL clamp	4 A	1 mA	± (0.7 % + 0.02 %)
		40 A	10 mA
Frequency		42.5 Hz to 69 Hz	0.01 Hz	± (0.1 %)
Auxillary input		± 10 V dc	0.1 mV	± (0.2 % + 0.02 %)
Voltage min/max		1000 V	0.1 V	± (1 % + 0.1 %)
Current min/max		Defined by accessory	Defined by accessory	± (5 % + 0.2 %)
Cosφ/DPF		0 <= Cosφ <=1	0.01	± 0.025
Power factor		0 <= PF <=1	0.01	± 0.025
THD on voltage		1000 %	0.1 %	± (2.5 % ± 0.05)
THD on current		1000 %	0.1 %	± (2.5 % ± 0.05)

Intrinsic Uncertainty ± (% of reading + % of range)¹
Parameter	Influence quantity	iFlex1500-12	iFlex3000-24	iFlex6000-36	i40S-EL
Parameter	Influence quantity	150A/1500A	300A/3000A	600/6000A	4A/40A
Active power P	PF ≥ 0.99	1.2 % + 0.005 %	1.2 % + 0.0075 %	1.7 % + 0.0075 %	1.2 % + 0.005 %
Active power P	0.5 < PF < 0.99	1.2 % + 7 x (1-PF) +0.005 %	1.2 % + 7 x (1-PF) + 0.0075 %	1.7 % + 7 x (1-PF) + 0.0075 %	1.2 % + 10 x (1-PF) + 0.005 %
Apparent power S, S fund.	0 ≤ PF ≤ 1	1.2 % + 0.005 %	1.2 % + 0.0075 %	1.7 % + 0.0075 %	1.2 % + 0.005%
Reactive power N, Q fund.	0 ≤ PF ≤ 1	2.5 % of measured apparent power
Additional uncertainty in % of range¹	U >250 V	0.015 %	0.0225 %	0.0225 %	0.015 %
¹Range = 1000 V x Irange Reference conditions: Environmental: 23 °C ± 5 °C, instrument operating for at least 30 minutes, no external electrical/magnetic field, RH <65 % Input conditions: Cosφ/PF=1, Sinusoidal signal f=50 Hz/60 Hz, power supply 120 V/230 V ±10 % Current and power specifications: Input voltage 1 ph: 120 V/230 V or 3 ph wye/delta: 230 V/400 V Input current: I > 10 % of Irange Primary conductor of clamps or Rogowski coil in center position Temperature coefficient: Add 0.1 x specified accuracy for each degree C above 28 °C or below 18 °C

Electrical Specifications
Power Supply
Voltage range	100 V to 500 V using safety plug input when powering from the measurement circuit
	100 V to 240 V using standard power cord (IEC 60320 C7)
Power consumption	Maximum 50 VA (max. 15 VA when powered using IEC 60320 input)
Efficiency	≥ 68.2 % (in accordance with energy efficiency regulations)
Maximum no-load consumption	< 0.3 W only when powered using IEC 60320 input
Mains power frequency	50/60 Hz ± 15 %
Battery	Li-ion 3.7 V, 9.25 Wh, customer-replaceable
On-battery runtime	Four hours in standard operating mode, up to 5.5 hours in power saving mode
Charging time	< 6 hours
Data Acquisition
Resolution	16-bit synchronous sampling
Sampling frequency	5120 Hz
Input signal frequency	50/60 Hz (42.5 to 69 Hz)
Circuit types	1-φ, 1-φ IT, Split phase, 3-φ delta, 3-φ wye, 3-φ wye IT, 3-φ wye balanced, 3-φ Aron/Blondel (2-element delta), 3-φ delta open leg, Currents only (load studies)
THD	THD for voltage and current is calculated using 25 harmonics
Averaging period	User selectable	1 sec, 5 sec, 10 sec, 30 sec, 1 min, 5 min, 10 min, 15 min, 30 min
Demand interval	User selectable	5 min, 10 min, 15 min, 20 min, 30 min
Data storage	Internal flash memory (not user replaceable)
Memory size	Typical 20 logging sessions of 10 weeks with 10-minute intervals¹
Logging period	Averaging period Recommended	20 sessions	1 session
	1 second	3 hours	2.5 days
	5 seconds	15 hours	12 days
	10 seconds	28 hours	24 days
	30 seconds	3.5 days	10 weeks
	1 minute	7 days	20 weeks
	5 minutes	5 weeks	2 years
	10 minutes	10 weeks	> 2 years
	15 minutes	3.5 months	> 2 years
	30 minutes	7 months	> 2 years¹
Interfaces
USB-A	File transfer via USB flash drive, firmware updates Max. current: 120 mA
USB-mini	Data download device to PC
Extension port	Accessories
Voltage Inputs
Number of inputs	4 (3 phases and neutral)
Maximum input voltage	1000 Vrms, CF 1.7
Input impedance	10 MΩ
Bandwidth (-3 dB)	2.5 kHz
Scaling	1:1, 10:1, 100:1, 1000:1 and variable
Measurement category	1000 V CAT III/600 V CAT IV
Current Inputs
Number of inputs	3, mode selected automatically for attached sensor
Input voltage	Clamp input: 500 mVrms/50 mVrms; CF 2.8
Rogowski coil input	150 mVrms / 15 mVrms at 50 Hz, 180 mVrms / 18 mVrms at 60 Hz; CF 4; all at nominal probe range
Range	1 A to 150 A/10 A to 1500 A with thin iFlex flexible current probe, 12 inches
	3 A to 300 A/30 A to 3000 A with thin iFlex flexible current probe, 24 inches
	6 A to 600 A/60 A to 6000 A with thin iFlex flexible current probe, 36 inches
	40 mA to 4 A/0.4 A to 40 A with 40 A clamp i40s-EL
Bandwidth (-3 dB)	1.5 kHz
Scaling	1:1 and variable
Auxiliary Inputs
Number of inputs	2
Input range	0 to ± 10 V dc, 1reading/s
Scale factor (available 2014)	Format: kx + d user configurable
Displayed units (available 2014)	User configurable (7 characters, for example, °C, psi, or m/s)
The number of possible logging sessions and logging period depends on user requirements.

Environmental Specifications
Operating temperature	-10 °C to +50 °C (14 °F to 122 °F)
Storage temperature	-20 °C to +60 °C (−4 °F to 140 °F)
Operating humidity	10 °C to 30 °C (50 °F to 86 °F) max. 95 % RH
	30 °C to 40 °C (86 °F to 104 °F) max. 75 % RH
	40 °C to 50 °C (104 °F to 122 °F) max. 45 % RH
Operating altitude	2000 m (up to 4000 m derate to 1000 V CAT II/600 V CAT III/300 V CAT IV)
Storage altitude	12,000m
Enclosure	IP50 in accordance with EN60529
Vibration	MIL 28800E, Type 3, Class III, Style B
Safety	IEC 61010-1: Overvoltage CAT IV, Measurement 1000 V CAT III / 600 V CAT IV, Pollution Degree 2
EMI, RFI, EMC	EN 61326-1: Industrial
Electromagnetic compatibility	Applies to use in Korea only. Class A equipment (industrial broadcasting and communication equipment)
Radio frequency emissions	IEC CISPR 11: Group 1, Class A
Temperature coefficient	0.1 x accuracy specification/°C

General Specifications
Color LCD display	4.3-inch active matrix TFT, 480 pixels x 272 pixels, resistive touch panel
Warranty
1730 and power supply	Two-years (battery not included)
Accessories	One-year
Calibration cycle	Two-years
Dimensions
1730	19.8 cm x 16.7 cm x 5.5 cm (7.8 in x 6.6 in x 2.2 in)
Power supply	13.0 cm x 13.0 cm x 4.5 cm (5.1 in x 5.1 in x 1.8 in)
1730 with power supply attached	19.8 cm x 16.7 cm x 9 cm (7.8 in x 6.6 in x 3.5 in)
Weight	1730	1.1 kg (2.5 lb)
	Power supply	400 g (0.9 lb)
External protection	Holster, Kensington lock slot

1500-12 iFlex Flexible Current Probe

Specifications
Measuring range	1 to 150 A ac / 10 to 1500 A ac
Nondestructive current	100 kA (50/60 Hz)
Intrinsic error at reference condition*	± 0.7 % of reading
Accuracy 1730 + iFlex	± (1 % of reading + 0.02 % of range)
Temperature coefficient over operating temperature range	0.05 % of reading/°C 0.09 % of reading/°F
Working voltage	1000 V CAT III, 600 V CAT IV
Probe cable length	305 mm (12 in)
Probe cable diameter	7.5 mm (0.3 in)
Minimum bending radius	38 mm (1.5 in)
Output cable length	2 m (6.6 ft)
Weight	115 g
Transducer cable material	TPR
Coupling material	POM + ABS/PC
Output cable	TPR/PVC
Operating temperature	-20 °C to +70 °C (-4 °F to 158 °F) temperature of conductor under test shall not exceed 80 °C (176°F)
Temperature, non-operating	-40 °C to +80 °C (-40 °F to 176 °F)
Relative humidity, operating	15 % to 85 % non-condensing
IP rating	IEC 60529:IP50
Warranty	One-year
*Reference condition: Environmental: 23 °C ± 5 °C, no external electrical/magnetic field, RH 65 % Primary conductor in center position

Features

Easily Discover Opportunities for Energy Savings for Your Facility

The Fluke 1730 Three-Phase Electrical Energy Logger introduces a new simplicity to discovering sources of electrical energy waste. No other energy logger on the market can deliver a 600 V CAT IV/1000 V CAT III safety rating, directly download data from the instrument to a USB stick or store more logging sessions.

With the 1730, you can:

Easily discover when and where energy is being consumed in your facility, from the service entrance to the individual circuits.
Compare multiple data points over time and build the complete picture of energy usage with Fluke Energy Analyze software package.
Quickly understand specific points of energy loss, reduce energy bills more easily than ever.

The Fluke 1730 is the best choice when looking for a dedicated energy logger for performing energy surveys and load studies.

Take Energy Surveys to the Next Level

If you’re looking to take your energy surveys to the next level, show up with the 1730 Energy Logger and a VT02 Visual IR Thermometer or the Ti125 Infrared Camera to quickly identify opportunities for energy savings both electrically and thermally. When using a thermal imaging camera or a visual IR thermometer along with the 1730 Energy Logger, you’ll be able to discover potential problems that could be wasting energy and then quantify them electrically with the 1730 Energy Logger. The perfect tool set to discover hidden operational wastes such as lighting, air conditioning and other large loads that could be switched off when not in use.

Key measurements: Voltage, current, power, power factor and associated values enable you to optimize and implement your energy saving strategies.
Bright, color touch screen: Perform convenient in-the-field analysis and data checks with full graphical display.
Comprehensive logging: More than 20 separate logging sessions can be stored on the instrument. In fact, all measured values are automatically logged and can be reviewed during logging and before downloading for on-the-go analysis.
Optimized user interface: Capture the right data every time with quick, guided, graphical setup and reduce uncertainty about your connections with the intelligent verification function.
Complete "in-the-field" setup through the front panel: no need to return to the workshop for download and setup or to take a computer to the electrical panel.
Wide range power: power the instrument directly from the measured circuit eliminating the need to find a power outlet while allowing the instrument to be secured safely inside electrical panels.
Two USB ports: one for PC connection and another for fast, simple download to standard USB thumb drives, or other USB devices.
Compact size: designed to fit in tight spaces and panels.
Highest safety rating in the industry: 600 V CAT IV/1000 V CAT III rated for use at the service entrance and downstream.
Optimized measurement accessories: flat voltage cable and thin flexible current probes ensure easy installation even in tight spaces.
Battery life: four-hour operating time (backup time) per charge on lithium-ion battery.
Security: We safeguard your best asset from theft with an option to use a hefty, durable Kensington lock.
Energy Analyze application software: Download and analyze a snapshot of your energy savings potential with our automated reporting.

Share your knowledge of this product with other customers... Be the first to write a review

Browse for more products in the same category as this item:

SHOP ALL PRODUCTS > Brands > Fluke
SHOP ALL PRODUCTS > Brands
SHOP ALL PRODUCTS > Data Loggers
SHOP ALL PRODUCTS