MegaPulse D5-PF Surge Tester

Surge tester built to the requirements of IEC 60601-1:2005 (Issue 3) Figure 10 (IEC 60601-1 Figure 50 in older versions). Conducts IEC 60601-1:2006 Figure 11; IEC 60601-2-34 Issue 2 (optional); IEC 60601-2-34 Issue 3 (included); IEC 60601-2-49; EC-13; EC-53 and the new requirement of IEC 60601-2-25:2011 and IEC 60601-2-27:2011 Tests of protection against the effects of defibrillation (Common mode, Differential mode), Energy reduction test (EC-13). All these tests use the same 5000V source with difference in output wave shaping. The various wave shaping output circuits required for each test are included in the D5-PF.

The more remarkable changes of the D5-PF version are: output voltage selected digitally, direct joules readout, increased accuracy, faster time between pulses "20 seconds", increased signal generator voltage, pass/fail reference is integrated, dry cap is used and USB Testminder is standard.and our unique feature Integrated energy measurement.

• Integrated energy measurement
• USB Testminder, Computer Control.
• Build-in Pass/Fail reference.
• External interlock, disables HV output and defeats test when circuit is open.
• Long life capacitor rated for 2.5 million pulses included.
• Microcontroller technologies.
• Ergonomically designed for safety, speed and efficiency.
• Front panel indicates internal high voltage and polarity
• Output voltage and polarity are controlled manually on front panel.
• Cables, manual and calibration certificate included.
• One year calibration cycle.
• One year warranty.