Ships complete with cables, a manual, and a Calibration Certificate. Made in the USA.

• Adds high precision leakage current and duration settings to the user-friendly HT-2000 for better control of tests.
• Allows no load setup of leakage current and test dwell times.
• Once entered, leakage current and test dwell times can be referenced on the front panel display at any time.
• Leakage currents can be set from 1-20mA in 0.1mA increments.
• Dwell times can be set from 1-60 seconds in 1 second increments.
• Two tests with one setup. Conducts UL/CSA Ground continuity and Hipot tests with one setup, so no additional equipment is needed.
• Small and light. 9.25" wide x 4.25" high x 10" deep. 11 lbs. But rugged enough to test manufactured housing.
• Ground continuity check is defeatable for testing two-wire products.
• Easy equipment connections. Plug your equipment right into the NEMA plug on the front panel. No adapters needed!
• J2 and J3 cords allow connection of pigtail power leads.
• Simple test outcome judgement. Green lights mean pass - red lights mean fail. Failing tests sound a buzzer as well.
• Ready for your UL Inspector out of the box. NIST Traceable Calibration Certificate to MIL-STD45662-A is included. Cal cert is in accordance with UL guidance.
• Operation Instructions are printed on the rear panel for easy reference.
• In-depth testing. Both true Arc Dectection and Leakage Current circuits test the product to find problems.
  RED lights and a buzzer leave no question if a failure has occurred.
• Expandable for TUV/European Agency Testing. Can be connected to our GF-30ac 25A Ground Bond Tester with optional TEST-LINK™.
• Optional 120kohm calibration resistor can be mounted on the rear panel.
• Easy shift-by-shift Function Test. Compatible with our Patented function checker, the HTT-1.