![](/v/vspfiles/templates/signaltestinc/images/DBox_Border_Left_Top.gif) |
![](/v/vspfiles/templates/signaltestinc/images/clear1x1.gif) |
![](/v/vspfiles/templates/signaltestinc/images/DBox_Border_Right_Top.gif) |
![](/v/vspfiles/templates/signaltestinc/images/clear1x1.gif) |
■ LR8512 Basic specifications (Accuracy guaranteed for 1 year)Operation | Measurement data is sent wirelessly to the LR8410-20, which is required in order to collect data. Up to seven units can be controlled. Operates over a line-of-sight distance of up to 30 m (98.43 ft) |
---|
Measurement parameters | [Number of channels] 2ch (common GND) [Measurement modes] Pulse (Totalization/Instant), no. of revolutions, logic (Records an 1/0 for each recording interval) [Measurement ranges] Totalization: 1000M pulse f.s., resolution: 1 pulse; No. of revolutions: 5000/n[r/s] f.s., resolution: 1/n [r/s] *n is the number of pulses, 1 to 1000, per revolution. [Supported input format] Non-voltage "a" contact (always-open contact point), open collector, or voltage input (0 to 50 V) |
---|
Recording | [Interval] 0.1 to 30 sec, 1 to 60 min, 16 selections, [Mode] Instantaneous value |
---|
Power supply | AC Adapter Z2003 (100 to 240 V AC, 50/60 Hz), or LR6 (AA) alkaline battery ×2, or External power: 5 to 13.5 V DC |
---|
Continuous use | About 14 days using AA alkaline batteries (with an interval of 1s and Bluetooth® on) |
---|
Dimensions and mass | 85 mm (3.35 in) W × 61 mm (2.40 in) H × 31 mm (1.22 in) D, 95 g (3.4 oz) (excluding the battery) |
---|
Accessories | CD-R (Instruction manual, Logger utility software) ×1, Measurement guide ×1, Caution paper (using radio wave) ×1, LR6 (AA) Alkaline battery ×2, Connection cable L1010 ×2 |
---|
|
|
![](/v/vspfiles/templates/signaltestinc/images/clear1x1.gif) |
![](/v/vspfiles/templates/signaltestinc/images/DBox_Border_Left_Bottom.gif) |
![](/v/vspfiles/templates/signaltestinc/images/clear1x1.gif) |
![](/v/vspfiles/templates/signaltestinc/images/DBox_Border_Right_Bottom.gif) |
![](/v/vspfiles/templates/signaltestinc/images/DBox_Border_Left_Bottom.gif) |
![](/v/vspfiles/templates/signaltestinc/images/clear1x1.gif) |
![](/v/vspfiles/templates/signaltestinc/images/DBox_Border_Right_Bottom.gif) |
![](/v/vspfiles/templates/signaltestinc/images/DBox_Border_Left_MidDiv.gif) |
![](/v/vspfiles/templates/signaltestinc/images/clear1x1.gif) |
![](/v/vspfiles/templates/signaltestinc/images/DBox_Border_Right_MidDiv.gif) |
![](/v/vspfiles/templates/signaltestinc/images/clear1x1.gif) |
Features
The Hioki LR8512/LR8513 are input modules of a wireless multi-channel data logger of pulse, logic signal and AC/DC current using Bluetooth® technology to send measured data to a central logging station. LR8410 series Wireless logger. Note: The LR8512/8513 alone is not capable of making measurements. Countries and regions where wireless operation is currently supported: Japan, U.S.A., Canada, EU, Norway, Switzerland, Turkey, Russia, Vietnam, and India. Bluetooth® is a trademark of Bluetooth SIG, Inc. and licensed for use by HIOKI E.E. CORPORATION. • For pulse totalization and measuring logical ON/OFF signals or revolutions • Compact, two-channel model fits where other devices don’t • Measurement data is sent to the Hioki LR8410 using Bluetooth® wireless technology • Measurement data is saved even when communications are interrupted • Three-way power (AC adapter, AA alkaline batteries, or external 5 to 13.5 V power supply) • Instrument can store 500,000 data points per channel
|
|
![](/v/vspfiles/templates/signaltestinc/images/clear1x1.gif) |
![](/v/vspfiles/templates/signaltestinc/images/DBox_Border_Left_Bottom.gif) |
![](/v/vspfiles/templates/signaltestinc/images/clear1x1.gif) |
![](/v/vspfiles/templates/signaltestinc/images/DBox_Border_Right_Bottom.gif) |
![](/v/vspfiles/templates/signaltestinc/images/clear1x1.gif)
|