|
|
|
|
■ LR8513 Basic specifications (Accuracy guaranteed for 1 year)Operation | Measurement data is sent wirelessly to the LR8410-20, which is required in order to collect data. Up to seven units can be controlled. Operates over a line-of-sight distance of up to 30 m (98.43 ft) |
---|
Measurement parameters | [Number of channels] 2ch (common GND) [Measurement modes] AC load current, DC load current, AC leak current (using current sensor) [Measurement ranges] 500.0 mA AC to 2000 A AC, 10.00 A DC to 2000 A DC (By current sensor) *Current and leak current that occur intermittently cannot be measured. |
---|
Measurement accuracy | ±0.5% rdg.±5 dgt. (DC, AC 50/60 Hz) *Add the sensor's accuracy when the current sensor is connected |
---|
Recording | [Interval] 0.5 to 30 sec, 1 to 60 min, 14 selections, [Mode] Instantaneous value, average value |
---|
Power supply | AC Adapter Z2003 (100 to 240 V AC, 50/60 Hz), or LR6 (AA) alkaline battery ×2, or External power: 5 to 13.5 V DC |
---|
Continuous use | About 10 days reading instantaneous values using AA alkaline batteries (with an interval of 1 s and Bluetooth® on) |
---|
Dimensions and mass | 85 mm (3.35 in) W × 75 mm (2.95 in) H × 38 mm (1.50 in) D, 130 g (4.6 oz) (excluding the battery) |
---|
Accessories | CD-R (Instruction manual, Logger utility software) ×1, Measurement guide ×1, Caution paper (using radio wave) ×1, LR6 (AA) Alkaline battery ×2, Connection cable L1010 ×2 |
---|
|
|
|
|
|
|
|
|
|
|
|
|
|
Features
The Hioki LR8512/LR8513 are input modules of a wireless multi-channel data logger of pulse, logic signal and AC/DC current using Bluetooth® technology to send measured data to a central logging station. LR8410 series Wireless logger. Note: The LR8512/8513 alone is not capable of making measurements. Countries and regions where wireless operation is currently supported: Japan, U.S.A., Canada, EU, Norway, Switzerland, Turkey, Russia, Vietnam, and India. Bluetooth® is a trademark of Bluetooth SIG, Inc. and licensed for use by HIOKI E.E. CORPORATION. • Measure AC and DC load current and AC leak current • Choose from eight current sensors • Place inside a distribution panel, close the cover, and monitor measured values from the outside • Measure power easily—just set the voltage and power factor • Compact, two-channel model fits where other devices don’t • Measurement data is sent to the Hioki LR8410-20 using Bluetooth® wireless technology • Measurement data is saved even when communications are interrupted • Three-way power (AC adapter, AA alkaline batteries, or external 5 to 13.5 V power supply) • Instrument can store 500,000 data points per channel
|
|
|
|
|
|
|